High-molecular-weight ladder preparation
Stock buffer: 62.5 mM Tris-H₃PO₄ (pH 7.5), 2 mM EDTA, 2% w/v SDS, 33% w/v glycerol, 5 mM DTT and 0.02% v/v ProClin 300.
Thaw at room temperature and gently dissolve any precipitate. Current manual HB221103 recommends 5–10 µL; 5 µL is sufficient for a 5 × 1.5 mm well. Incomplete dissolution or insufficient warming can disperse bands.
For bands above 100 kDa, longer or higher-voltage transfer may help. For poor transfer, the manual suggests reducing methanol and adding a small amount of SDS to the transfer buffer, no more than 0.1% final. This concerns transfer buffer, not adding reducing agents to the ladder.
Low-percentage gels can carry lower bands at the front. Use an unstained standard in the same buffer system for calibration.
The older HB220428 supporting document gives different loading volumes and transport conditions. Use current manual HB221103 for operating guidance. Its page-2 diagram caption also misnames a low-range ladder; this product's range remains 25–300 kDa.